For cars, the shift cable or selector transfer cable is used to change the gears. The cable is responsible for positioning the transmission in gear indicated by the driver’s shift selector. During the vehicle, the shift cable works and makes the adjustments if you shit the gear. Automatic-transmission vehicles have only one shift cable, while manual-transmission vehicles have two shift cables. The cable performs the same role in both types of vehicles and shows the same signs when they start to get bad. Vehicles with automatic transmission have only one shift cable, whereas vehicles with manual transmission have two shift cables. The cable plays the same role in both types of vehicles and shows the same signs when it gets damaged.
Here are some of the signs that you can spot if your shift cable bushing is not performing well or gets damaged.
1. The wrong indicator light for gears
The miss-match between indicator light and gear cable is one of the very first things that you will see when the change cable is going bad. You started driving, for example, by changing from park to drive, but the indicator still shows the light in the park. This means that instead of the correct gear, the cable has extended to the wrong spot.
2. Car is not turning off easily
If the cable is stretched too much, then you will spot a problem in turning off the car. In most of the vehicles, it is necessary to put it in park mode or gear to pull out the key from the ignition. It could be dangerous also as at the time of turning it off, and you may not know on which gear it has stopped.
3. Starting in another gear
If you often find that your vehicle is starting in another gear, then it has to be a matter of moving the cable. At the time of the stoppage, the stretched shift cable will bring the transmission into the wrong gear. In this situation, you need to contact the technician and get your vehicle tested immediately. If this is triggered by the shift cable, you can get it fixed at the new you accessible cost of the most reliable shift cable replacement.
4. Gears not shifting easily
When you face problems when changing gears after starting your car, then your change selector cable is in bad shape. Most of the time, the stretched cable makes it difficult to turn the gear when driving. It means you need to take the issue seriously and get your vehicle immediately checked for the replacement of the change cable.
So, if your shift cable is not working fine, you either need to go to a professional or buy a shift cable bushing repair kit.